CO2 laser engraving cutting motor / engraver cutter CNC router
http://www.ecpur.com/itm/2220.html
This is hot products CO2 Laser engraver and cutter instrument stand by Stamp and Cut after non-metal, such as rubber,ox horns, wood, plexiglass, atomic materials, crystal, bowlder, etc...
http://www.ecpur.com/images/large/40w-laser-engraving/laser-engraving-cutting_6.jpg
http://www.ecpur.com/images/large/40w-laser-engraving/laser-engraving-cutting_7.jpg
http://www.ecpur.com/images/large/40w-laser-engraving/laser-engraving-cutting_10.jpg
You can comfortably to shoot up this ring for penetrating wood, plexiglass, making models.
carving rubber categorize ,carving wood dog tag
Laser Type : CO2 Gas
Laser Power : 40W
Tube Trigger Volt : 20KV
Tube Operating Volt : 15KV
Current : 0-22mA
Interface to Computer : USB Port
Maximum Item Size to Engrave : 320mm * 220mm * 70mm (12.6W * 8.7L * 2.8H in )
Laser Tube (life hours) : 1100-1400 Hours
Engraving Speed : 0-350mm/s (0-13.8 in./s )
Cutting Speed : 0-35mm/s (0-1.38 in./s)
Minimum Shaping Character : 1mm * 1mm (0.04 X0.04in )
Resolution Ratio : 0.026mm (0.001 in ) / (1000dpi)
Resetting Positioning : ≤0.01mm (0.0004 in )
Motor Type : Stepper Motor
Software Supported : CorelDraw X4 and MoshiDraw 2013
Power Consumption : ≤250W
Operating Temperature : 0-45℃
Graphic Format Supported : .PLT / .DXF / .BMP / .JPG / .GIF / .PGN / .TIF etc..
Water Cooling : Water Pump include
Product Dimensions : 800mm * 500mm * 250mm (31.4in * 19.6in * 9.8in.)
Recommended Let go Parts / Consumables Laser Tube, Convergent lens, Reflection lens
*Co2 lasers will sign in the altogether metals when coated with a metal marking solution.
LMM Coated Metals are metals that from been sprayed with an LMM or Laser Marking Substantial Spray. Typically a CO2 laser engraver like the one sold here choice not impress on metals unless it is painted metal. Manner, LMM sprays be struck by recently been introduced to the make available and if acclimatized correctly, transfer aid a CO2 laser engraver to carve on many types of metal. We do not sell LMM disperse but you can discover it on the internet. Notwithstanding, we dont certain LLM enounce drive stint as we do not producer it. It would be up to you to learn how to use it. We do not accept returns on this jotting for the fitting of it did not impress on metal.
CO2 Laser engraver and cutter machine is toughened notwithstanding intaglio or acid of non-metal materials: such as rubber,ox horns, wood, plexiglass, atomic materials, crystal, bowlder, etc... Cutting thickness: 0-10mm (depends on rare materials)